Evaluation of Six Methods for the LP3 Distribution
Six frequently used estimation methods for the Log-Pearson type 3 distribution were evaluated using both the predictive and the descriptive performance indices. Ten LP3 populations and...
Discharge-Frequency Relationships in Distributary Flow Systems
The paper describes discharge-frequency relationships in distributary flow systems. The stream network that makes up the flow system is described in terms of how the various stream segments...
Temporal and Spatial Variations of Suspended Sediment Concentration during Navigation Traffic in a Natural River
Suspended sediment samples were collected within the channel border area during barge-tow passage events at three cross-sectional locations on the Upper Mississippi River. Typical plots...
Floating Cover Influence on Sediment Transport in Dune-Bed Channels
The results of laboratory flume experiments with a floating cover and a loose bed indicate that, relative to a free surface flow, the increased drag of a floating cover increases flow...
Carpet Flow Analysis
Under very high flow conditions, sediment may be transported either in a suspension or by carpet flow, as defined by Bagnold. This study examines the theoretical conditions for carpet...
Urban Runoff Based on Land Use and Particle Size
As point sources have achieved pollution compliance, the focus of pollution abatement has shifted to nonpoint sources. New Federal regulations require wet-weather monitoring of drainage...
Theoretical study of unstable waves in the rapids of the river
This paper examines how the velocity distribution in free-surface flow affects the kinematic and dynamic velocities of disturbance waves on hillslopes or in high-gradient rivers, thereby...
Numerical Analysis of High Velocity Flow with Zero-Depth Line and Oblique Shock Wave in Steep Open-Channels
This paper deals with the numerical analysis of 2D steady high velocity flows with the zero - depth line and the oblique shock wave in steep open channels by means of the method of characteristics....
Considerations in 2-D Modeling of Hydraulically Steep Flow
Simplifications in the equations used to describe shallow water flow lead to some difficulties in modeling supercritical flow. The hydrostatic assumption produces two significant differences...
Numerical Modelling and Laboratory Verification for the Turbulent Flow Field in the Branching Channel
Adopting the depth-averaged k-? turbulence model and using the finite volume method and SIMPLE procedure, the turbulent flow field in the branching channel is numerically solved and verified...
Standard Practice for Direct Design of Buried Precast Concrete Pipe Using Standard Installations (SIDD)
This publication, Standard Practice for Direct Design of Buried Precast Concrete Pipe Using Standard Installations (SIDD), (ASCE 15-93), is applicable to buried concrete precast pipe intended...
Estimating Network Model Parameters from Mail Survey Data
Network models are generally based on a four-step modeling process; trip generation, trip distribution, modal split, and trip assignment. Microcomputer implementations of these steps have...
Factors Controlling Strong Ground Motion and Their Associated Uncertainties
Of special interest in strong ground motion modeling is a quantification of the degree of influence specific physical parameters have on the computed motions. Associated with the model...
Data Base for Seismis Rick Assessment in Mexico City
We describe a model to estimate expected ground motions and expected damage, based on intensity damage relations derived for 14 classes of buildings representative of Mexico City construction....
System Factors in LRFD Format: A Multidimensional Judgment Call
A Load & Resistant Factor Design Specification for wood buildings is being completed. The Specification contains several revisions from the traditional 'repetitive member' factor...
In Situ Testing Performed at Jackson Lake Dam
Jackson Lake Dam was rehabilitated from 1986 to 1988 to increase seismic stability. Final foundation improvements consisted of dynamic compaction and mixed inplace soil cement columns....
Seismic Stability Modification Requirements for Pineview Dam
Pineview Dam is located 8 km upstream from Ogden, Utah, and about 8 km from the Wasatch Fault Zone. Preconstruction information and construction records available at the outset of the...
Investigation in 3-D of Stress Distribution in a Circular Tunnel and Vertical Emplacement Holes Due to Thermal and Overburden Loading in Tuff
Thermal stress and displacement analysis using two 3-D finite element models, one having a course mesh and one having a highly detailed mesh are presented. Results are compared to those...
Pollutant Removal Efficiency of Detention Basins
A simple method is presented for quick estimates of pollutant removal efficiency of detention basins under dynamic conditions. The method is based on the generalized solutions to the reservoir...
A Derived Flood Frequency Distribution for Ungaged Catchments
Flood frequency distribution for ungaged catchments are described in the article. The various parameters that effect the flood frequency distribution are describes. Influence of the climate...
Return to search